Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Impala SS >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Rear Door Window Run Channel Replacement >> Removal Procedure

Removal Procedure

Fig 1: Replacing Rear Door Window Run Channel
GM1650570Courtesy of GENERAL MOTORS CORP.
NOTE: Refer to PAINT DAMAGE NOTICE .
  1. Apply masking tape to the door frame and applique.
  2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door (Impala) .
  3. Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (Impala) .
  4. Position the window in the full down position.
  5. Remove the window channel bolt (2).
  6. Remove the window channel from the door.
scientia non olet · About Mike's Workshop Manuals