Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Impala SS >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Diagnostic Information and Procedures >> DTC B1016 >> Circuit/System Verification

Circuit/System Verification

  1. Program the VIN information to the BCM.
  2. Turn the ignition OFF, wait several seconds and then turn the ignition ON.
  3. Retrieve DTCs from the BCM. DTC B1016 should change to a history DTC.
    • If this DTC is retrieved as a current DTC, replace the module that set the DTC.
scientia non olet · About Mike's Workshop Manuals