Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> HHR LT, 2.4 P, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Spark Plug Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
  1. Remove the ignition coils. Refer to Ignition Coil(s) Replacement .
    2. IMPORTANT: Make sure that any water and/or debris is blown out of the spark plug holes prior to removing the spark plugs.
  2. Remove the spark plugs using a 5/8 inch spark plug socket.
scientia non olet · About Mike's Workshop Manuals