Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Epica LT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LBK) - DTC P0506 To DTC P2110 >> DTC P0510 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, engine OFF observe the idle switch parameter with a scan tool while slowly depressing the accelerator pedal to wide open throttle. The idle switch parameter should change from ON to OFF when the accelerator pedal is depressed.
  2. If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
scientia non olet · About Mike's Workshop Manuals