Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Remote PS Fluid Reservoir Bracket Replacement >> Installation Procedure

Installation Procedure

Fig 1: Power Steering Fluid Reservoir, Capstick, Bracket & Bolts
GM663178Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering fluid reservoir bracket (5) into the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts (4) to the power steering fluid reservoir bracket (5).

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the power steering fluid reservoir. Refer to Remote Power Steering Fluid Reservoir Replacement .
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
scientia non olet · About Mike's Workshop Manuals