Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Ground Strap Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Ground Strap Terminal At Frame Stud
    GM675395Courtesy of GENERAL MOTORS CORP.
  1. Remove the ground strap nut and terminal from the stud on the frame.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 2: View Of Engine Oil Temperature Sensor Electrical Connector
    GM651886Courtesy of GENERAL MOTORS CORP.
  3. Remove the ground strap bolt, strap (1) and engine harness ground.
  4. Remove the ground strap.
scientia non olet · About Mike's Workshop Manuals