Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Chevy Express G2500, Van Cargo Extended, 6.6 2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.6L (LLY) - DTC P0401 To DTC P268A >> DTC P0403 >> Circuit/System Description

Circuit/System Description

The exhaust gas recirculation (EGR) valve is controlled by the engine control module (ECM) through the EGR motor high control and the EGR motor low control circuits. The ECM supplies voltage that is near ignition voltage to the high and low control circuits at all times. The ECM will pulse width modulation (PWM) the low control circuit to ground when EGR is desired. The lower the pulse width, the more the valve will open. The ECM will PWM the high control circuit to ground when the EGR valve is desired closed. If the ECM detects an electrical malfunction on the control circuits, DTC P0403 will set.

scientia non olet · About Mike's Workshop Manuals