Circuit/System Testing
Observe the DTC information with a scan tool. If DTC P2146, P2149, P2152 or P2155 are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
One Fuel Injector DTC Sets
- Disconnect the affected fuel injector connector.
- With ignition OFF, connect a test lamp between the affected fuel injector control circuit and a ground.
- If the test lamp illuminates, test the injector control circuit for a short to voltage.
- If the test lamp did not illuminate, test the affected fuel injector control circuit for an open.
- Test the affected fuel injector for high resistance. Refer to Component Testing in this diagnostic.
- If all circuits test normal, replace the ECM.
Two or More Fuel Injector DTCs Set
- Test the affected group injector positive voltage control circuit for an open.
- Test the affected fuel injector for high resistance. Refer to Component Testing in this diagnostic.
- If all circuits test normal, replace the ECM.