Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2006 >> Chevy Express G2500, Van Cargo Extended, 6.6 2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.6L (LLY) - DTC P0016 To DTC P0342 >> DTC P0128 >> Circuit/System Verification

Circuit/System Verification

  1. If the ignition has been OFF for 10 hours or more, the ECT and the IAT should be within 6°C (11°F) of each other and also the ambient temperature. Turn ON the ignition with the engine OFF and use a scan tool to observe the IAT and the ECT sensor parameters.
  2. Inspect the ECT sensor terminals for corrosion and for engine coolant leaking through the sensor.
  3. Use the scan tool to verify the proper operation of the engine cooling fans.
  4. Turn OFF the ignition.
  5. Inspect the cooling system surge tank for the proper engine coolant level. Refer to Cooling System Leak Testing and Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (Vac N Fill) .
  6. Verify the proper heat range and the operation of the thermostat. Refer to Thermostat Diagnosis .
scientia non olet · About Mike's Workshop Manuals