Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Transmission Vent Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.4L.
  2. Use a hammer and a chisel in order to raise the transaxle vent seat off of the transaxle.
    3. Fig 1: View Of Transaxle Vent
    GM164785Courtesy of GENERAL MOTORS CORP.
  3. Use a flat-bladed tool in order to pry the transaxle vent (37) out of the transaxle.
scientia non olet · About Mike's Workshop Manuals