Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 419 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Window Switch Replacement - Right Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power window switch to the switch mounting plate.
    Fig 1: Installing Power Window Switch (Right Front)
    G01813992Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors.
  3. Install the switch mounting plate to the front door trim panel.
    Fig 2: Installing Switch Mounting Plate (Right Front)
    G01813993Courtesy of GENERAL MOTORS CORP.

    Insert the front edge into the trim panel and snap down the rear of the switch mounting plate to the front door trim panel.

scientia non olet · About Mike's Workshop Manuals