Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment Systems >> Repair Instructions >> Overhead Console - VES Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Disconnecting Electrical Connectors From Overhead Console
    GM787701Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the console.
    2. Fig 2: Removing Bulbs From Dome Light
    GM787690Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the dome light.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 3: Lowering Screen From Overhead Console
    GM787699Courtesy of GENERAL MOTORS CORP.
  3. Install the screws to the rear of the DVD screen.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    4. Fig 4: Removing Screws From Dome Light
    GM787700Courtesy of GENERAL MOTORS CORP.
  4. Install the bulbs in the dome light.
    5. Fig 5: Removing Dome Light Lens Cover
    GM787693Courtesy of GENERAL MOTORS CORP.
  5. Install the dome light lens cover.
    6. Fig 6: Lowering Screen From Overhead Console
    GM787699Courtesy of GENERAL MOTORS CORP.
  6. Raise the screen and lock the screen into place.
scientia non olet · About Mike's Workshop Manuals