Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Automatic Transaxle - Introduction & Repair Instructions) >> Repair Instructions >> Pressure Control Solenoid (PCS) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Pressure Control Solenoid
    GM20865Courtesy of GENERAL MOTORS CORP.
  1. Install the torque signal regulator spring (308), the torque signal regulator valve (309), the Pressure Control Solenoid (PCS) with two O-rings and screen (312, 309, 310) and the PCS retainer clip (304).
  2. Install the transmission side cover. Refer to Case Side Cover Replacement .
scientia non olet · About Mike's Workshop Manuals