Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Automatic Transaxle - Introduction & Repair Instructions) >> Repair Instructions >> Thermo Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: View Of Thermo Element & Plate
    GM164817Courtesy of GENERAL MOTORS CORP.
  2. Remove the thermo element pins and washers (120 and 123).
  3. Remove the thermo element (121) and the thermo element plate (122).
scientia non olet · About Mike's Workshop Manuals