Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Mirror Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
  2. Release the tabs and push the switch bezel from the door trim.
  3. Fig 1: Disconnecting Electrical Connectors From Switches
    GM1235719Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors from the mirror switch.
  5. Remove the switch from the bezel.