Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Disc Brake Caliper Bolts
    GM219603Courtesy of GENERAL MOTORS CORP.
  1. Install the disc brake caliper and bolts (2). Refer to Brake Caliper Replacement - Rear .
  2. Apply and release the brake pedal (3/4 stroke) as many times as necessary in order to obtain a firm brake pedal.
scientia non olet · About Mike's Workshop Manuals