Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. Refer to Battery Replacement .
  2. Cut the negative battery cable near the conduit and tape the cut-end with electrical tape.
  3. Disconnect the negative battery cable from the vehicle ground locations, left upper frame rail and transaxle case.
  4. Pull the conduit back over the remaining cable.