Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls (Introduction)) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Duct
    GM1465271Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) for the mass air flow (MAF)/air intake temperature (IAT) sensor (5).
  2. Remove the lines (2) from the air duct (4).
  3. Loosen the air intake duct clamps (3).
  4. Remove the air intake duct (4) from the throttle body.
  5. Remove the MAF/IAT sensor (5) from the air cleaner housing (7).
scientia non olet · About Mike's Workshop Manuals