Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Drive Belt Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Air Filter Housing Assembly And Bolts
    GM1290087Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Belt Dressing Notice in Cautions and Notices.
  1. Remove the air filter housing assembly bolts and the air intake tube.
  2. Remove the air filter housing assembly from the vehicle.
    3. Fig 2: View Of Wrench On Tensioner Bolt
    GM1290088Courtesy of GENERAL MOTORS CORP.
  3. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner and releasing the tension on the serpentine accessory drive belt.
    4. Fig 3: Identifying Serpentine Accessory Drive Belt
    GM1290089Courtesy of GENERAL MOTORS CORP.
  4. Remove the serpentine accessory drive belt.
scientia non olet · About Mike's Workshop Manuals