Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.4L DOHC - Introduction And Mechanical Repairs >> Repair Instructions >> Intake Manifold Tuning (IMT) Valve Actuator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Rail
    GM1371864Courtesy of GENERAL MOTORS CORP.
  1. Install the IMT valve actuator valve to the IMT valve.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the IMT valve actuator valve bolts.

    Tighten:  Tighten the IMT valve actuator valve retaining bolts to 12 N.m (106 lb ft)  .

  3. Connect the vacuum hose to the IMT valve actuator valve.
scientia non olet · About Mike's Workshop Manuals