Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.8L (L36 And L67) - Introduction (2 Of 2) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical-3.8L.
  2. Fig 1: Disconnecting/Reconnecting TP Sensor & Connector
    GM178680Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the throttle position (TP) sensor electrical connector.
  4. Fig 2: Locating TP Sensor Screws
    GM178693Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 TP sensor screws.
  6. Fig 3: View Of TP Sensor
    GM178694Courtesy of GENERAL MOTORS CORP.
  7. Remove the TP sensor.