Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Equinox LS, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Window Weatherstrip Run Channel Assembly
    GM1378601Courtesy of GENERAL MOTORS CORP.
  1. Install the window weatherstrip run channel assembly.
    1. Starting at the lower rear corner of the window opening, press the weatherstrip run channel onto the door flange.
    2. Ensure the channel is fully secured into the upper corners of the door frame.
  2. Install the inner belt seal. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
  3. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
scientia non olet · About Mike's Workshop Manuals