Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls (Introduction) -- 2.2L (L61)) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Throttle Body
    GM782280Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use the new MAP sensor seal provided with the new MAP sensor.
  1. Install the MAP sensor (2) into the intake manifold.
  2. Connect the MAP sensor harness connector.
  3. Install the accelerator cable bracket. Refer to Accelerator Controls Cable Bracket Replacement .
  4. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
scientia non olet · About Mike's Workshop Manuals