Removal Procedure
- Relieve the CNG fuel system pressure. Refer to Fuel Pressure Relief Procedure .
- Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE in Engine Electrical.
- Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
- Disconnect the fill line fitting (7) at the fill valve and discard the O-ring.
- Disconnect the fuel line fitting (10) at the check valve (11) and discard the O-ring.
- Remove the P-clamp screw (8).
- Remove the fuel line from the vehicle.
CAUTION:
Refer to Compressed Natural Gas (CNG) Flammability Caution in Cautions and Notices.
CAUTION:
Refer to Compressed Natural Gas (CNG) Fuel Pressure Relief Caution in Cautions and Notices.