Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Chevy Express G2500, Van Cargo Extended, 4.3 X, 4L60E/M30 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L - Introduction >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: Perform the CKP system variation learn procedure whenever the crankshaft position (CKP) sensor is removed or replaced. Refer to CKP System Variation Learn Procedure .
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Identifying CKP Sensor Harness Connector
    GM10937Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the CKP sensor harness connector.
    3. Fig 2: View Of CKP Sensor Bolt
    GM10938Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor mounting bolt.
    4. Fig 3: View Of CKP Sensor & Bolt
    GM11485Courtesy of GENERAL MOTORS CORP.
  4. Remove the CKP sensor.
scientia non olet · About Mike's Workshop Manuals