Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - (Introduction) Specifications & Repair Instructions) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Accelerator Pedal Assembly
    GM17457Courtesy of GENERAL MOTORS CORP.
  1. Lift upward on the accelerator pedal (3) to relieve tension on the cable (2).
  2. Remove the retainer (1) from the pedal lever (4) hole.
  3. Remove cable (2) from the slot in the pedal lever (4).
  4. Remove the accelerator pedal mounting fasteners.
  5. Remove the accelerator pedal assembly.
scientia non olet · About Mike's Workshop Manuals