Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Brake Switch Electrical Connector
    GM161582Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
    2. Fig 2: Expanded View Of Stop Lamp Switch & Brake Pedal
    GM161625Courtesy of GENERAL MOTORS CORP.
  2. Install the switch (2) and pushrod (4) onto the brake pedal (1) pin.
  3. Install the retainer (3) onto the brake pedal (1) pin.
  4. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals