Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - (Introduction) Specifications & Repair Instructions) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Air Temperature (IAT) Sensor
    GM317493Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor in the air cleaner outlet duct.
    2. Fig 2: Locating Intake Air Temperature (IAT) Sensor Harness Connector
    GM423117Courtesy of GENERAL MOTORS CORP.
  2. Connect the IAT sensor harness connector.
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals