Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Pitman Arm Replacement (AWD) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Pitman Arm Retaining Nut & Washer
    GM689123Courtesy of GENERAL MOTORS CORP.
  1. Align the marks made on the pitman arm during removal in order to install the pitman arm on the pitman shaft.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the washer and the pitman arm retaining nut.

    Tighten:  Tighten the pitman arm retaining nut to 250 N.m (185 lb ft).

  3. Install the power steering gear. Refer to Power Steering Gear Replacement (RWD) or Power Steering Gear Replacement (AWD) in Power Steering System.
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals