Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Locating RH Seat Back Hinge Bolts
    GM300213Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the seat back hinges on the right and left side.

    Tighten:  Tighten the bolts to the seat back hinges on the right and left side to 30 N.m (22 lb in).

  3. Install the lumbar support cable. Refer to Lumbar Support Cable Replacement .
    4. Fig 2: Seat Back Cover View (YC5 and YC6)
    GM300212Courtesy of GENERAL MOTORS CORP.
  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7) .
  5. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
scientia non olet · About Mike's Workshop Manuals