Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Install the high-mounted stop lamp to the body.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the screws to the high-mounted stop lamp.

    Tighten 

    Tighten the screws to 6 N.m (53 lb in).

    Fig 1: Installing Screws & High-Mounted Stop Lamp
    G01813005Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals