Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery tray.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the battery tray bolts.

    Tighten 

    Tighten the battery tray bolts to 10 N.m (89 lb in).

  3. Install the battery. Refer to Battery Replacement .
    Fig 1: Installing Battery Tray & Bolts
    G01829753Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals