Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Window Replacement - Sliding Door Swing Out >> Removal Procedure

Removal Procedure

  1. Remove the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door in Interior Trim.
    2. Fig 1: Locating Plugs For Swing-Out Window Access Hole
    GM320044Courtesy of GENERAL MOTORS CORP.
  2. Use a small flat-bladed tool in order to remove the plugs from the swing-out window access hole on the sliding door.
    3. Fig 2: Locating Swing-Out Window Latch Screws
    GM320051Courtesy of GENERAL MOTORS CORP.
  3. Remove the swing-out window latch screws.
  4. Remove the stud nuts from the swing-out window hinge.
    5. Fig 3: View Of Swing-Out Window
    GM320047Courtesy of GENERAL MOTORS CORP.
  5. Remove the swing-out window from the sliding door.
scientia non olet · About Mike's Workshop Manuals