Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Roller Bracket Replacement - Upper >> Installation Procedure

Installation Procedure

    Fig 1: View Of Sliding Door Upper Roller Bracket
    GM319976Courtesy of GENERAL MOTORS CORP.
  1. Install the sliding door upper roller bracket to the front edge of the upper track.
  2. Align the sliding door upper roller bracket to the grease pencil marks.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the sliding door upper roller bracket bolts.

    Tighten:  Tighten the sliding door upper roller bracket bolts to 10 N.m (89 lb in).

  4. Remove the support from the sliding door.
  5. Install the headliner trim finish molding. Refer to Headlining Trim Finish Molding Replacement in Interior Trim.
  6. Install the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door in Interior Trim.
scientia non olet · About Mike's Workshop Manuals