Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Armrest Replacement - Front Seat >> Installation Procedure

Installation Procedure

    Fig 1: View Of Armrest Assembly
    GM755397Courtesy of GENERAL MOTORS CORP.
  1. Install the armrest to the seat.
    2. IMPORTANT: Ensure that you reset the C-clip (open end facing downwards) into the slotted shaft if the armrest C-clip becomes disengaged from the slotted shaft during the removal of the armrest.
  2. Push inward on the armrest in order to seat the C-clip onto the armrest pivot shaft.
  3. Install the J retainer at the bottom edge of the seat back trim cover.
  4. Install the front seat. Refer to Seat Replacement - Bucket .
  5. Return the seat back to the original position.
scientia non olet · About Mike's Workshop Manuals