Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Blade Element Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
    Fig 1: View Of Wiper Blade Claws
    GM429895Courtesy of GENERAL MOTORS CORP.
  1. Insert the open end of the wiper blade element into the bottom claws of the wiper blade.
  2. Guide the wiper blade element through the wiper blade claw sets.
    3. Fig 2: View Of Bottom Claw Of Wiper Blade
    GM429898Courtesy of GENERAL MOTORS CORP.
  3. Engage the bottom claw of the wiper blade into the notches in wiper blade element.
  4. Install the wiper blade onto the wiper arm. Refer to Wiper Arm Blade Replacement .
scientia non olet · About Mike's Workshop Manuals