Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Release Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: View Of Cruise Release Switch
    GM882916Courtesy of GENERAL MOTORS CORP.
  2. Rotate the cruise control release switch counterclockwise until the travel stop has been reached (approximately 60 degrees).
    3. Fig 2: View Of Cruise Control Release Switch At Retainer
    GM882912Courtesy of GENERAL MOTORS CORP.

  3. Remove the cruise control release switch from the retainer.

  4. Disconnect the cruise control release switch electrical connector.
scientia non olet · About Mike's Workshop Manuals