Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Cable From Throttle Lever & Accelerator Control Cable Bracket
    GM315309Courtesy of GENERAL MOTORS CORP.
  1. Remove the cable from the throttle lever and accelerator control cable bracket.
    2. Fig 2: View Of Cable At Module
    GM315305Courtesy of GENERAL MOTORS CORP.
  2. Rotate the cable counter clockwise at the module in order to remove the cable from the module.
  3. Remove the cable from the module band.
scientia non olet · About Mike's Workshop Manuals