Removal Procedure
NOTE:
Refer to Heated Oxygen and Oxygen Sensor Notice in Cautions and Notices.
IMPORTANT:
The heated oxygen sensor (HO2S) may be difficult to remove at temperatures above 48°C (120°F). In order to prevent damage to any threads in the exhaust manifold, allow the exhaust system to cool down before attempting to remove the HO2S.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Pull the HO2S 2 electrical connector (1) through the floor pan.
- Disconnect the HO2S 2 (2) electrical connector.
- Remove the HO2S 2 (2) from the exhaust pipe.
CAUTION:
Refer to Vehicle Lifting Caution Vehicle Lifting Caution in Cautions and Notices.