Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Install the lower BPMV bracket (3) to the wheel house.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the three BPMV bracket nuts to the studs on the lower BPMV bracket (3).

    Tighten:  Tighten the three BPMV bracket nuts to 10 N.m (7 lb ft).

  3. Install the BPMV and EBCM as an assembly to the lower BPMV bracket (3). Refer to Brake Pressure Modulator Valve (BPMV) Replacement .
  4. Perform the ABS Automated Bleed Procedure .
    5. Fig 1: View Of BPMV, Upper & Lower Mounting Brackets & EBCM
    GM395809Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals