Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 4L60-E/4L65-E - Introduction, Service & Replacement >> Repair Instructions >> Floor Shift Control Knob Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Floor Shift Control Knob & Screw
    GM1335263Courtesy of GENERAL MOTORS CORP.
  1. Install the knob onto the transmission control.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten control knob set screw.

    Tighten:  Tighten the control knob set screw to 2.5 N.m (22 lb in).

scientia non olet · About Mike's Workshop Manuals