Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 704 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Hook Of Wiper Arm Through Opening In Wiper Blade
    GM871366Courtesy of GENERAL MOTORS CORP.
  1. Install the hook of the wiper arm through the opening in the wiper blade.
  2. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  3. Connect the washer hose to the washer nozzle.
  4. Move the wiper arm back to the parked position.
  5. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About Mike's Workshop Manuals