Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 686 (Engine Control System - 5.3L - Introduction) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Disconnect the electrical connection from MAF/IAT sensor.
  3. Remove air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  4. Loosen clamp (2) retaining MAF/IAT to upper air box.
    5. Fig 1: Identifying MAF/IAT Sensor
    GM1275969Courtesy of GENERAL MOTORS CORP.
  5. Remove MAF/IAT (1) sensor from vehicle.
scientia non olet · About Mike's Workshop Manuals