Scan Tool Output Controls
WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
Roof and Door Module (RDM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Header Latch | - | The roof/door module (RDM) actuates the header latch to the Latched position when commanded ON. The header latch will actuate to Unlatched when commanded OFF. |
| Pump Motor Direction | - | When the Open command is selected, the roof/door module (RDM) will actuate the hydraulic pump motor in the roof open rotational direction for 2 seconds. When the Close command is selected, the RDM will actuate the hydraulic pump motor in both directions. First in the roof close rotational direction for 2 seconds, then pausing for 3 additional seconds and then activating the pump in the open direction for 2 more seconds. |
| Roof System | - | The roof/door module (RDM) operates the roof system through a complete open cycle when commanded Open. When Close is commanded, the RDM operates the roof system through a complete close cycle. The roof Open and Close cycle commands can be terminated at any time by pressing the Exit or Abort key. |
| Tonneau Latch | - | The roof/door module (RDM) actuates the tonneau latch to the unlatched position when commanded Off. The RDM actuates the tonneau latch to the latched position when commanded On. |
| Valve 1 | - | When commanded On, the roof/door module (RDM) energizes the #1 hydraulic pump solenoid valve to the open position for 5 seconds or until commanded Off. In a partially closed roof situation, the roof panels will retract to their mechanical resting position while the valve is open. |
| Valve 2 | - | When commanded On, the roof/door module (RDM) energizes the #2 hydraulic pump solenoid valve to the open position for 5 seconds or until commanded Off. In a partially closed roof situation, the roof panels will retract to their mechanical resting position while the valve is open. |
| Valve 3 | - | When commanded On, the roof/door module (RDM) energizes the #3 hydraulic pump solenoid valve to the open position for 5 seconds or until commanded Off. In a partially closed roof situation, the roof panels will retract to their mechanical resting position while the valve is open. |
| Valve 4 | - | When commanded On, the roof/door module (RDM) energizes the #4 hydraulic pump solenoid valve to the open position for 5 seconds or until commanded Off. In a partially closed roof situation, the roof panels will retract to their mechanical resting position while the valve is open. |