Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Power Steering System) >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (Regular) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Reservoir, Control Valve Assembly, Flow Control Spring & Rectangular Section Seal
    GM431058Courtesy of GENERAL MOTORS CORP.
  1. Drain the oil from the reservoir (1).
  2. Remove the control valve assembly (3) from the pump housing (1). Make sure the flow control spring (4) does not fall out of the pump housing (1).
  3. Remove the rectangular section seal (2) from the control valve assembly (3).
scientia non olet · About Mike's Workshop Manuals