Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L, & 6.0L (Introduction) >> Repair Instructions >> Spark Plug Wire Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Spark Plug Wire & Boot
    GM343699Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the spark plug wire at each spark plug.
    • Twist each spark plug wire 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  2. Disconnect the spark plug wire from the ignition coil.
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wires from the ignition coil.
scientia non olet · About Mike's Workshop Manuals