Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L, & 6.0L (Introduction) >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Disconnect the electrical connection from mass air flow (MAF)/intake air temperature (IAT) sensor.
  3. Remove air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  4. Loosen clamp (2) retaining MAF/IAT to upper air box.
    5. Fig 1: Identifying MAF/IAT Sensor
    GM1275969Courtesy of GENERAL MOTORS CORP.
  5. Remove MAF/IAT (1) sensor from vehicle.
scientia non olet · About Mike's Workshop Manuals