Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.

Disconnect the battery negative cable.
Remove the retainer (3) from the brake pedal pin.

Fig 1: Expanded View Of Stop Lamp Switch & Brake Pedal
Courtesy of GENERAL MOTORS CORP.
Unsnap the switch (2) and pushrod (4) from the brake pedal (1) pin.

Fig 2: Identifying Stop Lamp Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector.