Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb.
  2. Install the license lamp.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the license lamp screws.

    Tighten:  Tighten the license lamp screws to 2 N.m (18 lb in).

    Fig 1: Locating License Lamp Retaining Screws
    GM296133Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals