Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Accessory Switch Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the armrest screws and the armrest YC5.
  2. Remove the window handle, if equipped.
  3. Pull out on the escutcheon in order to remove the lock lever escutcheon. Start with the front edge of the escutcheon.
    Fig 1: Locating Lock Lever Escutcheon
    GM319092Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper corner trim using the following method:
    1. Pull the upper corner trim at the top edge.
    2. Pivot the upper corner trim down in order to clear the tab at the trim panel, YC6 and YC7.
  5. Remove the caps that cover the screws for the assist handle.
  6. Remove the screws that retain the assist handle to the door.
  7. Remove the screw at the front edge of the accessory switch mount plate.
  8. Remove the plate from the trim panel.
  9. Disconnect the electrical connectors from the switches on the plate, as needed.
scientia non olet · About Mike's Workshop Manuals